Home
About Me
DVDs For Sale>
Items For Sale>
Preview DVD Clips
Testimonials
Contact Us
Members Only
Shopping Cart
3.  How to Install Oil and Gas Fired Hot Water Boilers with Basic Plumbing Methods - 2 DVD Set -- $100.00   
New Release! 7/10/2010





Install Boilers Disk 1

Install Gas Boilers Disk 2

How to Install Oil and Gas Fired Hot Water Boilers with Basic Plumbing Methods - 2 DVD Set

Today’s introductory sale price: $100.00 on the new version of one of my best selling DVDs!  For a limited time, receive two FREE printed help manuals with purchase.

You will receive two DVDs (running time four hours) plus two printed manuals. “One Easy Loop” explains heat loss and how many baseboard heaters your home requires. The DVD walks you through hooking up the hot water boiler. The help manual explain how to install the baseboard heaters and connect them to the boiler.

This is one of my best selling How to DVDs! You will see a complete residential boiler replacement performed on the job, not in some boring classroom!

We’ll start off in the shop showing you things of interest as well as basic plumbing methods. Then you’ll follow me to the job site as I service real customers’ equipment (a WTGO Weil McLain Residential Oil Fired Hot Water Boiler). I’ll explain in easy-to-follow, step-by step instructions how to install an Oil or Gas Fired Boiler.

You will see how to install indirect hot water tanks, step by step plumbing up of a tankless coil for domestic hot water, and in-depth explanations of piping options that will save you time and money.

See how to install the water feeder, backflow preventer, expansion tank and flow check valve on a one-thermostat system. Learn how to install a serviceable air bleeder, stove piping and proper installation of the barometric damper. Chimney, code and safety issues are also covered.

Note: For Gas Boilers, There are only two issues…You must follow each Gas Boiler Manufacturer’s Exhaust Venting Requirements as Gas Boilers use different types of Venting Materials, unlike Oil. Secondly, you will need your gas company to hook up the gas and do a safety inspection. With this DVD, you just saved $2500+ in Labor Installation Fees so you can afford to have the gas company or certified gas contractor hook up the gas line! (It’s normally not expensive as long as you stay within the same BTU Usage.)

Oil boilers should also be safety inspected, or have a combustion efficiency test done, or at a minimum, have a Draft Over the Fire Test and Smoke Test performed.

No fancy skills required, anyone with a desire to learn can do this! The basics shown on this video apply for 98% of all Residential Gas or Oil Fired Hot Water Boilers. Please note these DVDs do not cover any Steam Boiler Systems. You will need to read the wiring instructions and have some basic electrical understanding for installation.

Here’s what you’ll learn (running time 4 hours!):

Disk 1 (No Menu System, but you can fast forward):

  • How to Save Time Using Black Iron Piping instead of Expensive Copper Piping and Fittings
  • How to Sweat Leaking Copper Pipes Using Jet Sweat
  • How to Use Pex Tubing instead of Time Consuming Copper Piping on Domestic Water Piping
  • How to Use Tools of the Trade
  • How to Wire up Honeywell Zone Valves for Multiple Zones
  • How to Install Indirect Hot Water Tanks – Details Explained
  • How to Install a Hot Water Boiler
  • How to Fill the Hot Water Boiler and Purge the Air from the System
  • How to Bleed the Oil Fuel Pump on the Oil Burner
  • For Gas Boilers, same methods apply, except follow manufacturer’s instructions for gas venting and have a certified gas company install the gas line and perform a safety check

Disk 2 (This DVD has a Menu System):

  • You will see a Category #1 Natural Atmospheric Chimney Vented Gas Boiler to the basic details on installing a Buderus GB142, 94% Super Efficient wall hung modulating gas boiler
  • Pre-made mixing manifold details and basic plumbing
  • Buderus ST150 Indirect Hot Water Tank proper ifc pump installation details
  • Venting with 3” schedule 40 pvc piping and proper pitch
  • Condensate Traps with installation details
  • Outdoor reset as this modulating boiler will determine what temp and firing rate is needed according to outdoor temperature and load demand
  • Gas line piping from old boiler to new boiler and other piping options
  • Checking proper gas pressure and basic LP conversation details
  • Basic piping, zone valves and purge layout
  • Special details about installing discussed
  • Start up details
  • Combustion testing
  • I will cover the basic plumbing details (closely similar to Oil Fired Boilers) for installing Category #1 natural atmospheric chimney vented boilers using room air for combustion and show you what to do if the room is too small to provide combustion air
  • Details on venting and proper materials
  • I will quickly discuss Direct Vent gas fired boilers and special vent piping required. Example: Weil Mclain GV, CG, CGA, CGI, CGS, Peerless floor mounted, HB Smith, and 95% of all floor mounted gas boilers
  • I will quickly demonstrate removing a bad indirect hot water tank and installing a new Weil McLain Plus 40 tank. The process is the same for most other indirect hot water tanks installed on a hot water boiler system
  • Plus learn secrets of the trade other servicemen don’t want YOU to know!
These are easy to follow instructions, step by step details shown in real-time...so just about anyone can understand. I explain everything you need to know to install a hot water boiler, in high-resolution detail, complete with close-ups. No guesswork, you will see exactly what I’m doing. This information has never been available to the public before!

I am a veteran Master Heating Technician with 27 years experience in the field. I’ve taken a professional digital movie camera onto all jobs showing everything you need to know…revealing short cuts to save you time and money. I am proud to be the ONLY Producer of such How to DVDs in the USA and after four years, my DVDs are well known from Maine to Alaska.

This particular DVD video is one of my best sellers! When it was recently released they sold for $119.95 each, but now with this Inventory Reduction Sale – a Spring Special Deal – the price is reduced to only $80 plus shipping.

Besides basic tools, only two special tools are required: a Westwood T40 Smoke Tester, and a Bacharach draft-rite Pocket Draft Gauge to measure draft over the fire. As a bonus, you will receive a FREE Oil Burner Set-Up Tool. This is a limited-time offer so don't delay placing your order.

STOP BEFORE YOU BUY this How to Install Hot Water Boilers DVD: Check out our New 2 DVD set which includes: Disk 1: "How to Install Hot Water Boilers - Oil or Gas with Basic Plumbing Methods,” and “How to Clean & Tune Up Oil Fired Hot Water Boilers.” This 2 DVD set is ON SALE for only $125 plus shipping. Get both and save BIG $$$.

(Please note the recently released Disk #2 for Gas Boilers is not included, but may be purchased for an additional $40.)

Keeping your oil fired boiler clean and tuned up is a must every 10 to 12 months. The primary reason heating systems fail prematurely is due to improper servicing. A correctly cleaned heating system saves at least one hundred gallons of fuel every year! So look for the 2 DVD set and learn to keep your new boiler running efficiently!

Here’s what my customers have been saying about these videos:

Great eBayer very good product, very informative !! AAA+++
Excellent Video. Gave me the Info I Couldn't Get Anywhere Else!!!!!!!!!!!!!!!
You make this look so easy. Takes all the mystery out of my boiler service. Thanks
Super informative on how to so easy to service my boiler after watching this video
Thanks your DVD helped me fix a beckett that was not set up right.
Very good video, has helped me to service my own boiler for the first time!
Awesome videos this is my 3rd one helped me troubleshoot/fix my beckett burn A++
Incredibly helpful info illustrating procedures that I will use for yrs to come!
Great video. I serviced my two furnaces in a few hours. Thanks.
This video is great!! Step by step instruction shows all the details. Thanks.
The Boiler man DVD is a plus, very accurate and I am very satisfied.
Great video. thanks for sharing your knowledge. Ill be buying other videos.
I never knew any of this! Great help! Tells it all, makes it easy! A must have!
Check our 100% positive feedback for ecstatic customer testimonials! These high-quality DVDs were recorded on professional equipment and cost thousands of dollars to produce. The recording material used is the best money can buy: Certified Taiyo Yuden Professional DVD-R.

Don’t hesitate, buy the DVD now for only $79.95 and get your FREE Oil Burner Set-Up Tool. Shipping is an additional $5 for USPS Priority Mail. (Shipment to Canada is $20). We ship fast – you’ll get your DVD in less than a week!

You won’t find this information anywhere else! Take advantage of my 27 years experience as a Master Heating Contractor, learn secrets of the trade and save thousands of dollars installing your hot water boiler yourself...with this one small investment!

Please don’t hesitate to ask any questions as due to the nature of the item, all sales are final. Defective DVDs will be replaced with another copy.

Please be aware that the free information and website mentioned in the DVD are no longer available at this time due to legal action.

The information is to be used for personal use only. These video(s) cannot be used for Commercial Training of employees in any of the trades. Any orders associated with a business name will be cancelled and your money refunded unless you have obtained written permission and paid the required licensing fees (see below). Each employee may make a purchase in his or her name only and DVDs are not to be shared.

Thank you for visiting, and have a great day!

Disclaimer and Buying Contract:

The Boiler Man (aka www.theBoilerMan.biz) accepts no liability for any of the content on these How-to Videos, or responsibility for any incidental or consequential damages of any actions taken based on the information provided. Any views or opinions presented are solely those of the author, producer, and owner of these video(s). The Boiler Man LLC expressly accepts no liability of any kind for the contents shown of this educational material. When you purchase any of our How-to Video(s), you the purchaser, accept these terms of sale.

These How-to Video(s) are for Educational purposes Only. You may not in any way duplicate, replicate, copy, share transfer or sell any information provided in the video(s) without our express written consent. Should you enter into duplicating, providing or sharing any part of the purchased information provided within these DVD videos, then you, the purchaser, are solely responsible and liable for your own actions. You also are responsible for honoring copyrights of these video(s). The information is only to be used for viewing by the original purchaser, and for personal (non- commercial use).

These video(s) cannot be used for Commercial Training of employees in any of the trades. Any use beyond will require you to contact us for written permission as well as to pay a licensing fee for such usage.

The license fee for Commercial Usage is $500 per DVD. Individual(s) in the HVAC and related trades making purchase(s) must contact us and pay the license fee as described. If you are purchasing for an individual’s personal usage but are listing an email and/or mailing address for a business, then send your full name, home and business address to explain this. All DVDs will have a reward paid if found being used for Commercial - Training purposes. When purchasing, you agree to the above stated conditions. If you cannot agree to restrict use of the video(s) as described above, then kindly leave the website as we cannot sell to you.

All Videos are sold “As-is, where-is”. They are not returnable unless the DVD proves defective. Simply return the DVD(s) in its original condition and we will send you a replacement. Email us ASAP if there is a problem with the functionality of any DVD. All DVDs are new, scratch-free, and tested before leaving our facility. All sales are final.

The Boiler Man LLC - South Burlington, VT

Featured Product
Calorstat Replacement Thermostatic Damper Draft Control
$259.00

Where's The Boiler Man?
View My eBay Feedback
Follow Me on Twitter
See Me On
YouTube
Preview My
Video Clips